Sno Edge Logo

Intel MAX 10 FPGA System on Module

Sno Edge

Sno Edge 50

Key Features

Intel MAX 10 FPGA
Sno Edge: 25K LE
Sno Edge 50: 50K LE
Embedded 8-bit microcontroller
126 digital I/O
60 differential pairs
16 analog inputs
200-pin DD2 form factor

Sno Edge and Sno Edge 50
High-Density I/O
FPGA System-on-Module (SoM)

Based on Alorium Technology’s very popular embeddable Snō FPGA module, the Sno Edge modules enhance the powerful features and functionality of Snō with significantly increased digital I/O, additional ADCs, and more FPGA logic gates for custom Xcelerator Block development.

All of this functionality is packaged in a SODIMM form factor for the ultimate in low-profile physical integration.

There are two variants of the Sno Edge product based the number of MAX 10 logic elements:

Variant FPGA Logic Elements
Sno Edge 25K
Sno Edge 50 50K
Digital I/O

  • 3.3V
  • 126 total digital I/O
  • 60 differential pair I/O

Analog Inputs

  • 16 total analog inputs
  • 16 ADCs accessible via microcontroller
  • Range: 0-2.5V
  • ADC Performance: 1 MHz
  • Resolution: 12-bit sustained
  • Sample Rate: 254k samples/second

Additional Interfaces and I/O

  • FTDI
  • JTAG
  • 1 differential clock input for custom XB clocking
  • 1 secondary PLL differential clock output

Physical Dimensions

  • 2.7 inches x 1.3 inches
  • 200-pin DDR2 form factor

Specifications

  • Alorium Part Number: Sno Edge 50
  • FPGA: Intel MAX 10
  • FPGA Logic Elements: 50K
  • Embedded Microcontroller: ATmega328-Compatible
  • CPU Speed: 16 MHz / 32 MHzProgram FLASH: 32KB
  • SRAM: 2KB
  • Operating Voltage: 3.3V
  • Supply Voltage: 3.3V via Edge I/O

Sno Edge and Sno Edge 50
High-Density I/O FPGA System on Module (SoM)

 

Sno Edge
Sno Edge 50

Key Features

Intel MAX 10 FPGA – 25K LE
Sno Edge: 25K LE
Sno Edge 50: 50K LE
Embedded 8-bit microcontroller
126 digital I/O
60 differential pairs
16 analog inputs
200-pin DD2 form factor

Based on Alorium Technology’s very popular embeddable Snō FPGA module, the Sno Edge modules enhance the powerful features and functionality of Snō with significantly increased digital I/O, additional ADCs, and more FPGA logic gates for custom Xcelerator Block development.

All of this functionality is packaged in a SODIMM form factor for the ultimate in low-profile physical integration.

There are two variants of the Sno Edge product based the number of MAX 10 logic elements:

Variant FPGA Logic Elements
Sno Edge 25K
Sno Edge 50 50K
Digital I/O

  • 3.3V
  • 126 total digital I/O
  • 60 differential pair I/O

Analog Inputs

  • 3.3V
  • 16 total analog inputs
  • 6 ADCs accessible via microcontroller
  • ADC Performance: 1 MHz
  • Resolution: 12-bit sustained
  • Sample Rate: 254k samples/second

Additional Interfaces and I/O

  • FTDI
  • JTAG
  • 1 differential clock input for custom XB clocking
  • 1 secondary PLL differential clock output

Physical Dimensions

  • 2.7 inches x 1.3 inches
  • 200-pin DDR2 form factor

Specifications

  • Alorium Part Number: Sno Edge 50
  • FPGA: Intel MAX 10
  • FPGA Logic Elements: 50K
  • Embedded Microcontroller: ATmega328-Compatible
  • CPU Speed: 16 MHz / 32 MHzProgram FLASH: 32KB
  • SRAM: 2KB
  • Operating Voltage: 3.3V
  • Supply Voltage: 3.3V via Edge I/O